Showing posts with label Furniture. Show all posts
Showing posts with label Furniture. Show all posts

Monday, July 1, 2019

A Royal Chair Comes Emerges From The Goat Shead

This pile of wood was found in a goat shed in Washington state. The client thought thought it might be 19th Century Chinese throne that was once installed in his childhood home but couldn't recall the last time he saw it in one piece.

















Of course storing anything of value in a goat shed is probably not the best of ideas as it will likely result in damage. Fortunately, this chair is constructed of rosewood which is a quite dense and heavy wood and naturally resists rot, bug damage and warping.

Once we started the surface cleaning, we were pleasantly surprised that the wood and the finish were in such nice shape. Of course in part of that due to the wood used.




Wednesday, September 21, 2011

Rediscovering A Lost City

This is the front panel of a wood wedding chest. Over the years the wood has shrunk and expanded with the variations in temperature and humidity. This is the nature of wood. Unfortunately when the surface is painted that paint tends to suffer. In this case the natural gesso and oil painted delaminated, leading to heavy loses to the painted design.

The delaminating paint was consolidated with Acryliod B72. The missing areas were then retouched with Rhoplex WS24, powdered pigments and Golden fluid acrylics. The retouching was limited to just the missing areas. None of the original design was painted over, and the treatment is also reversible.

Friday, January 21, 2011

The Nature Of Hide Glue

Hide glue is an animal based glue. It was the glue of choice for constructing furniture up to around 1930 when the synthetic glue polyvinyl acetate started to be used commercially. This table was originally designed and put together with hide glue.

I mention designed, because it was accepted by the industry that hide glue will hold up for about 50-60 years and then start to let go. The joins will become loose and the table will begin to wobble. This means the table needs to be knocked apart, the joins cleaned and reconstructed with a new application of hide glue. The furniture was designed to fall apart, in a good way. 

So basically, every 50 years or so this table needs to spend a day at the spa.

Sunday, May 16, 2010

Touched by a Bouquet Flower


This image shows a few of the tabletops that come into the studio every year. All have the same problem, damage due to leaking flower pots. In some cases, it's just a simple white ring that can be removed by reactivating the surface finish to release the trapped water vapors.

If there are signs of black in or around the water stain, there is a good chance that the water has completely penetrated the finish and has seeped into the wood. This is much more difficult to resolve without removing the original finish from the tabletop.

Then there are the times when the wood has become so saturated with water that it swells and splits, or the veneer curls up like potato chips. This damage can be fixed. It will take a lot of time, and most likely include the removal of the original finish from the tabletop. Most important, do not through away any of the loose or detach pieces.

In all of these scenario, the damage can happen quickly and dramatically in just a few hours, or it can happen so slowly that you don't notice it until one day...

Monday, September 14, 2009

A Recommended Upgrade For Hanging Works of Art


2 common types of anchors for hanging a painting:
Eye Screws and D-Rings.

At a 4th of July party, after consuming a wonderful dinner, all the guests were stretching their legs in the back yard when suddenly, from inside the house, there came a loud crashing boom. Everyone rushed inside and discover that the large gilt framed mirror hanging over the buffet had fallen from the wall, smashed into the buffet, crushing the cut crystal decanters, and then fell forwards to land on top of the dinning room table were the glass mirror exploded, scattering shards of glass from one end of the dinning room to the other.

WHAT HAPPENED- The method for hanging the mirror on the wall failed. In this case, the eye screws simply worked themselves free from the gilt wood frame.

Eye screws used in conjunction with a wire stretched between the 2 screws, is the most common/traditional method for hanging works of art such as paintings and mirrors. This method is in fact a combination of weak links, who's failure is one of the most common causes of damage to paintings and mirrors.

WHAT'S WRONG- First and foremost, using Eye Screws.
WHY- Eye Screws are single points of contact screwed into each side of the wood frame. Any single point of contact is a weak point. The eye screw is also usually screwed straight into the frame, so that when the wire is attached and the painting is hung on the wall there are 2 points of stress created in the wood around each of the eye screws. These stress points, combined with the natural shrinking and expansion of the wood, WILL cause the eye screws to work themselves out of the wood over time.
WHAT'S RIGHT- Dump the eye screws! Through them away! Never use them again! Tell all your friends! Use D Rings instead, preferably D Rings with 2 screw holes each, as shown in the photo above.

WHAT ELSE IS WRONG- The wire is typically a single strand that is tied to each of the eye screws.
WHY- All the wight of the work of art is resting on the structural stability of a single wire. Should this one wire break all is lost.
WHAT'S RIGHT- The wire should be a braided wire so the wight is dispersed across several wires at the same time. The wire should be twice the distance of the eye screws so that it can be folded in half and then tied to the eye screws, doubling the strength of the wire.

WHAT ELSE IS WRONG- Works of art are typically hung from a wire that has only one point of contact/anchor in the wall.
WHY- For any work of art that weighs over 5 lbs, there should be 2 points of contact with the wall. This spreads the pressure/weight of the painting across 2 points.
WHAT'S RIGHT- Use 2 anchors in the wall, and use a wall mounted picture hook instead of just a plain old nail stuck into the drywall. If the work of art weighs over 10 lbs DO NOT use wire. Instead hang the work of art directly from the D Rings onto the wall mounted picture hooks.

HOW TO USE D RINGS- Follow the WHAT'S RIGHT directions above.

*Pre-drill a small pilot hole for each of the screws. This will prevent the wood from splitting. Make sure you do not drill all the way though the frame.

*If you are using a wire, slant the D Rings towards the top, center of the frame. This will lessen the stress points in the wood caused by the wire.

*Lastly, Use wall mounted picture hooks that are appropriate for the size and weight of your work of art.

Tuesday, June 30, 2009

Was Fixed Hall of Fame: Chair Leg


Here is an entry for the Was Fixed Hall of Fame. This is a close up photo of the back leg join from a very hansom oak arm chair, circa 1890.

This leg join has three kinds of glue on it, dried stripper, Four split wood dowels, four 3" long nails and five 3" long brads.

Here is the probable story of this chair.

It was originally constructed using wood dowels and animal skin glue. Over time the glue started to let go, this caused the chair to squeak when someone sat in it. To "fix" the squeaking, someone squeezed more glue into the loose joins, this acted like a wedge that helped to spread the joins further apart. Then someone added a few 3" large nails, which they pounded directly into the solid wood. This split the wood and caused more glue joins to fail. Later someone submerged the chair into a strip tank. This removed the painted finish that someone had applied to the chair and also filled the all the joins with paint stripper. With all the joins now loose the person refinishing the chair shot every join with enough 3" long brads to kill the squeaking.

All this chair ever needed was to be simply dismantled, cleaned, and then reconstructed with animal skin glue. Basically, a day at the spa.


Sunday, August 24, 2008

Was Fixed Hall of Fame: Plant Stand


A client brought this marble top plant stand in to Studio Six Art Conservation. She got it from a friend of a friend. She thought it was pretty but a bit too wobbly. So we took a look to see what the problem could be. When I removed the marble top I saw these white squares sticking out from the four leg joins. Upon closer inspection I was dumbfounded to see that the plant stand was held together with velcro!

Monday, July 14, 2008

The Underside of Family History


A client recently brought in a dinning room table that originally belonged to her Great Grandmother. It had been stored for years in a barn. The estate was dispersed and the farm was sold. The table was in very very bad shape, but the connection to family history was to strong to pass up. So the client brought it into Studio Six for restoration.

As the conservation report was being made, it was noted that the underside of the table (see photo) had lots of pencil scribbles and what turned out to be numerous globs of old crusty chewing gum.

After consulting with the client, it was determined that these artifacts were limited to an area where her Grandfather would have set as a child. The client decided not to remove these artifacts because they gave a very personal insight into the young life of her Grandfather.